China Jaw Crusher

China Jaw Crusher

 Simple maintenance tips for jaw crushers

Simple maintenance tips for jaw crushers

The jaw crusher is one of the most commonly used crushing equipments in the mining industry. It has the characteristics of large crushing ratio, uniform product size, simple structure, reliable operation, simple maintenance and economical operation. It is widely used in many sectors such as mining, smelting, building materials, roads, railways, water conservancy and chemical industries.

In the use of the jaw crusher, maintenance is a particularly important task, and it requires the work of the relevant personnel on a regular basis. It should be closely related to its operation and inspection. The basic maintenance methods of the jaw crusher are as follows:

1. Before using the jaw crusher, it is necessary to carry out detailed inspections on important parts such as lubrication system, crushing strength and transmission parts, and replace them in time. After ensuring that all moving parts of the crusher can be lubricated, start the motor. The cone crusher works normally. In the process, the lubrication system must be inspected according to the operating procedures, thus further ensuring the safe operation of the equipment. It is also necessary to maintain the activity of the lubricating oil used in the jaw crusher, and the temperature should be suitable to ensure regular replacement.

2. Stop feeding and then stop. After the ore in the crushing chamber of the jaw crusher device is completely discharged, the main motor is stopped, and then the oil pump is closed. After completely stopping, check each component and carry out daily maintenance and maintenance work, which will help extend the life of the equipment and increase the output of the jaw crusher.

The jaw crusher's lubricating oil should be kept fresh and not too dirty while maintaining normal oil temperature; always check the newly installed tires to prevent them from loosening; the jaw crusher should regularly check the wear and tear on the parts that are easy to wear. Degree, the replacement will be replaced; in the case of bearing oil temperature is too high, it is necessary to stop immediately to check the cause and clear and so on.